Choosing between options
Which pose for a ring: flat lay, upright, tipped or leaning?
A ring can be photographed four ways, and each says something different: standing up, it is a hero; laid flat, it is a catalogue entry; tipped toward the camera, the stone is the subject. The studio has all four as one-click poses, plus a slider for the angles between. Here is when to use which.
Upright — the hero
Standing on its band, stone up. The classic engagement-ring shot: it shows the setting's height and the profile of the shank, and it reads as an object rather than a diagram. Pair it with the Hero ¾ camera and the Hero or Showcase Look. This is the default, and for most rings it is the right one.
Tipped — the stone
Leaned 35° toward the camera. The table of the stone opens to the light and the crown facets catch it; the setting shows its depth. Use it when the stone is the point — a solitaire, a large centre stone, a halo. Pair with Close-up or Hero ¾, and the Traced renderer, because this is the pose where the stone is examined.
Leaning — the three-quarter
Between upright and flat. It shows the top of the ring and its side at once, which is the most informative single view of a band with detail on it — engraving, a pattern, side stones. Catalog ¾ camera. Good for a second listing image after the hero.
Flat lay — the catalogue
Laid down, looking into the band from above. It shows the ring as a circle with the head at the top, which is how catalogues have shown rings for a century, and it is the pose for a plain band or an eternity ring where there is no single stone to feature. Top camera; the Flat Lay Look sets pose, camera and paper lighting together. For a solitaire it hides the stone's profile, so use it as a supporting image rather than the hero.
The slider, and lean back
The ring-angle slider runs from −90° to 90° through all four, for the angle that suits a particular head. Lean back is separate: it tips the piece a few degrees backward so it rests on the floor like a product on a table, and a small value — five to ten degrees — is what stops an upright ring from looking as if it is floating. Everything here happens on your own machine: the file is converted and rendered in the browser through your GPU and is never uploaded, so an unreleased design stays unreleased.
- Solitaire or halo: Tipped, Close-up, Traced
- Most rings' hero: Upright, Hero ¾
- Detailed band: Leaning, Catalog ¾
- Plain band, eternity, catalogue page: Flat lay, Top
Questions
What is the best pose for an engagement ring?
Upright for the hero image, then Tipped as a second image to show the stone. Both with the Hero ¾ or Close-up camera and the Traced renderer.
When should I use flat lay?
For plain bands, eternity rings and catalogue pages — anything where the ring's circle is the subject rather than a centre stone. Pair it with the Top camera; the Flat Lay Look does both.
What does 'Lean back' do?
Tips the piece backward a few degrees so it rests on the floor like a real object on a table. A small value stops an upright ring from looking like it is floating; it applies to every pose.
Free · runs in your browser · your file is never uploaded